In this study, the performance of anionic polyacrilamide (APAM) being an effective flocculant in fines retention and its effects on drainage time of pulp suspension and papers properties were investigated. It was determined that the first pass fines retentions of furnishes which contained both stone groundwood and kraft pulps progressively increased with increase of APAM dosage. On the other hand, with 1% APAM addition, drainage time for unfilled and filled pulp suspensions which consisted of 80% stone groundwood pulp and 20% bleached kraft pulp increased 164% and 184% more than those of furnishes without APAM addition, respectively. Furthermore, it was determined that the breaking length, the burst index and the paper brightness increased with increasing APAM dosage. Consequently, it was concluded from this study that the drainage time and paper properties must be taken into consideration besides from benefits of fines retention when the APAM is used as a single retention aid.
Bu çalışmada etkili bir kümeleyici olan anyonik poliakrilamidin (APAM) kırıntı materyalin tutunmasındaki performansı ile bu maddenin hamur süspansiyonunun drenaj süresine ve bazı kağıt özellikleri üzerine olan etkisi incelenmiştir. APAM dozundaki artış ile hem taş mekanik hamur hem de kraft hamuru içeren tüm süspansiyonlarda ilk geçiş kırıntı tutunumunun arttığı tespit edilmiştir. Diğer taraftan, %1 APAM ilavesi ile %80 taş mekanik hamur ve %20 ağartılmış kraft hamurundan oluşan dolgu maddesi içeren ve içermeyen süspansiyonlarda drenaj sürelerinin APAM ilave edilmemiş süspansiyonlara göre sırası ile %164 ve %184 uzadığı
gözlenmiştir. Ayrıca, hamur süspansiyonlarına APAM ilave edilmesi kağıdın kopma uzunluğunu, patlama indisini ve parlaklık değerini düşürmüştür. Bu çalışmadan, APAM’ in tek başına tutundurucu olarak kullanıldığında kırıntı tutunum konusunda sağladığı fayda yanında, drenaj süresi ve kağıt özelliklerinin de dikkate alınması gerektiği saptanmıştır.
Primary Language | English |
---|---|
Journal Section | Eski Sayılar |
Authors | |
Publication Date | March 19, 2011 |
Published in Issue | Year 2004Volume: 5 Issue: 1 |