Research Article
BibTex RIS Cite

Yabani kızılcık (Cornus australis L.) odunundan kâğıt üretimi ve kabuğun kâğıt özelliklerine etkisi

Year 2017, Volume: 18 Issue: 2, 186 - 191, 15.10.2017
https://doi.org/10.17474/artvinofd.307335

Abstract

Genellikle kabuk hamur ve kâğıt özelliklerine
olumsuz etki yapmaktadır. Bu çalışmada, Kraft yöntemi kullanılarak Yabani
kızılcık (
Cornus australis L.)
odunundan kâğıt hamuru ve deneme kâğıtları üretilmiştir. Pişirme yonga/çözelti
oranı 1/5 ve pişirme sıcaklığı 170±2
°C sabit alınarak farklı
koşullarda yapılmıştır. Kraft metodu
Na2S/NaOH 18/20, 18/15, 18/10, 18/5 şartlarında
gerçekleştirilmiştir. Kabuğun kâğıt hamuru ve kâğıt üretimine olumsuz etkisi
olup olmadığını belirlemek için kabuksuz örneklerde en yüksek verimin elde
edildiği K2 Pişirmesi kabuklu örneklerle (K5) tekrarlanmıştır.
Ayrıca,
K2 pişirmesinin maksimum sıcaklığa ulaşma süresi 120 dakikadan 90 dakikaya
indirilerek yapılan pişirmede (K6) zaman ve enerji tasarrufu yapılıp
yapılanamayacağı irdelenmiştir.
 Kabuk ölçülen mekanik özellikleri ve hamur
verimini olumsuz etkilemiştir. Fakat bu olumsuz etki mekanik özelliklerde %95
güven aralığında belirgin değildir. Diğer taraftan, kabuk parlaklık
özelliklerinde olumsuz, opaklığa olumlu etki etmiştir. Bu etkiler %95 güven
düzeyinde anlamlıdır.


References

  • Bostancı Ş (1987) Kâğıt Hamuru Üretimi ve Ağartma Teknolojisi. Karadeniz Üniversitesi Orman Fakültesi Karadeniz Üniversitesi Basımevi Genel Yayın No:114 Fakülte Yayın No: 13 Trabzon.
  • Cömlekcioglu N, Tutus A, Cicekler M, Canak A and Zengin G (2016) Investigation of Isatis Tinctoria and Isatis Buschiana Stalks as Raw Materials for Pulp and Paper Production. Drvna Industrija 67(3): 249-255.
  • Gençer A (2015) The utilization of Kiwi (Actinidia deliciosa) Prunings Waste for Kraft Paper and the Effect of the Bark on Paper Properties. Drewno 58 (194): 103-113.
  • Gençer A, Özgül U (2015) Yaygın Fındık (Corylus avellana L.) Odunundan Soda Yöntemi İle Kağıt Hamuru Üretim Parametrelerinin Belirlenmesi. Turkish Journal of Forestry, 16(2):159-163.
  • Gençer A, Özgül U (2016) Utilization of Common Hazelnut (Corylus avellana L.) Prunings for Pulp Production. Drvna Industrija 67 (2): 157-162.
  • IAWA Committee (1989) IAWA list of microscopic features for hardwood identification IAWA Bulletin n.s., 10: 219–332.
  • ISO 5269-2 (2013) Pulps preparation of laboratory sheets for physical testing. Part 2: Rapid-Köthem method.
  • Kırcı H (2000) Kağıt Hamuru Endüstrisi. Ders Notları, Karadeni Teknik Üniversitesi Orman Fakültesi Yayınları,Yayın No:63
  • Miles P D, Smith W B (2009) Specific Gravity and Other Properties of Wood and Bark for 156 Tree Species Found in North America. Res. Note NRS-38. Newtown Square, PA: U.S. Department of Agriculture, Forest Service, Northem Research Station. 35p.
  • Schild G, Sixta H, Testova L (2010) Multifunctional Alkaline Pulping, Delignification and Hemicellulose Extraction. Cellulose Chemistry and Technology, 44 (1-3):35-45.
  • ISO 5267-1 (2012) Pulps- Determination of Drainability Part I: Schopper Reigler Method
  • SCAN-CM 15-62 Viscosity of Cellulose
  • Merev N (1998) Odun Anatomisi Cilt 1 Doğu Karadeniz Bölgesindeki Doğal Angiospermae Taksonlarının Odun Anatomisi. Genel Yayın No: 189 Fakülte Yayın No: 27 Karadeniz Teknik Üniversitesi Matbaası Trabzon.
  • TAPPI T 236 om-99 (1999) Kappa number of pulp
  • TAPPI T 402 sp-03(2003) Standard conditioning and testing atmospheres forpaper, board, pulp handsheets, and related products
  • TAPPI T275 sp-02 (2002) Screening of pulp (Somerville-type equipment)
  • TAPPI T200 sp-01 (2001) Laboratory beating of pulp (Valley beater method)
  • TAPPI T 402 sp-03 [2003]Standard conditioning and testing atmospheres for paper, board, pulp handsheets, and related products
  • TAPPI T525 om–02 (2002) Diffuse Brightness of Pulp (d/0)
  • TAPPI T519 om–02 (2002) Diffuse Opacity of Paper (d/0 paper backing)
  • TAPPI 414 om–98 (1998) Internal tearing resistance of paper (Elmendorf-type method)
  • TAPPI 403 om–02 (2002) Bursting strength of paper
  • TAPPI T494 om–01 (2001) Tensile Properties of Paper and Paperboard (Using Constant Rateof Elongation Apparatus)
  • URL-3 (2015). http://balcikhisar-der.tr.gg/ANA-SAYFA.htm.
  • Ververis C, Georghiou K, Christodouulakis N, Santas P, Santas R (2004) Fiber dimensions, lignin and cellulose of various plant materials and their suitability for paper production. Industrial Crops and Products 19 (3): 245-254
  • Wise L E, Jahn C (1952) Wood Chemistry. 2nd Edition Vol 1-2 Reinhold Publication Co. New York U.S.A.
  • Yaman B, Gençer A, (2005) Trabzon koşullarında yetiştirilen kiwi (Actinidia deliciosa (A.Chev.) C. F. Liang& A. R. Ferguson)’ nin morfolojisi. Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi A (2): 149-155.

Paper production from wild dogwood (Cornus australis L.) and the effect of bark on paper properties

Year 2017, Volume: 18 Issue: 2, 186 - 191, 15.10.2017
https://doi.org/10.17474/artvinofd.307335

Abstract

Generally bark has a negative effect pulp and paper properties. In this study, paper pulp and hand sheets were produced from Wild dogwood (Cornus australis L.) using Kraft method. The cooking have been different conditions, chip / solution ratio 1/5, cooking temperature 170±2 °C by taking constant. Kraft method with the Na2S/NaOH, 18/20, 18/15, 18/10, 18/5 performed. Samples were used with and without bark in order to identify the negative impacts of the bark on pulp and paper production. In addition, it has been investigated whether the time of reaching the maximum temperature of K2 cooking is reduced from 120 minutes to 90 minutes, and the time and energy saving can be made. For all of the mechanical properties that were measured and pulp yield, the bark had a negative effect. But, this effect had not significant on mechanical properties at 95% significant level. On the other hand the bark had a negative effect on brightness and positive effects on opacity. These effects had significant at 95% significant level.


References

  • Bostancı Ş (1987) Kâğıt Hamuru Üretimi ve Ağartma Teknolojisi. Karadeniz Üniversitesi Orman Fakültesi Karadeniz Üniversitesi Basımevi Genel Yayın No:114 Fakülte Yayın No: 13 Trabzon.
  • Cömlekcioglu N, Tutus A, Cicekler M, Canak A and Zengin G (2016) Investigation of Isatis Tinctoria and Isatis Buschiana Stalks as Raw Materials for Pulp and Paper Production. Drvna Industrija 67(3): 249-255.
  • Gençer A (2015) The utilization of Kiwi (Actinidia deliciosa) Prunings Waste for Kraft Paper and the Effect of the Bark on Paper Properties. Drewno 58 (194): 103-113.
  • Gençer A, Özgül U (2015) Yaygın Fındık (Corylus avellana L.) Odunundan Soda Yöntemi İle Kağıt Hamuru Üretim Parametrelerinin Belirlenmesi. Turkish Journal of Forestry, 16(2):159-163.
  • Gençer A, Özgül U (2016) Utilization of Common Hazelnut (Corylus avellana L.) Prunings for Pulp Production. Drvna Industrija 67 (2): 157-162.
  • IAWA Committee (1989) IAWA list of microscopic features for hardwood identification IAWA Bulletin n.s., 10: 219–332.
  • ISO 5269-2 (2013) Pulps preparation of laboratory sheets for physical testing. Part 2: Rapid-Köthem method.
  • Kırcı H (2000) Kağıt Hamuru Endüstrisi. Ders Notları, Karadeni Teknik Üniversitesi Orman Fakültesi Yayınları,Yayın No:63
  • Miles P D, Smith W B (2009) Specific Gravity and Other Properties of Wood and Bark for 156 Tree Species Found in North America. Res. Note NRS-38. Newtown Square, PA: U.S. Department of Agriculture, Forest Service, Northem Research Station. 35p.
  • Schild G, Sixta H, Testova L (2010) Multifunctional Alkaline Pulping, Delignification and Hemicellulose Extraction. Cellulose Chemistry and Technology, 44 (1-3):35-45.
  • ISO 5267-1 (2012) Pulps- Determination of Drainability Part I: Schopper Reigler Method
  • SCAN-CM 15-62 Viscosity of Cellulose
  • Merev N (1998) Odun Anatomisi Cilt 1 Doğu Karadeniz Bölgesindeki Doğal Angiospermae Taksonlarının Odun Anatomisi. Genel Yayın No: 189 Fakülte Yayın No: 27 Karadeniz Teknik Üniversitesi Matbaası Trabzon.
  • TAPPI T 236 om-99 (1999) Kappa number of pulp
  • TAPPI T 402 sp-03(2003) Standard conditioning and testing atmospheres forpaper, board, pulp handsheets, and related products
  • TAPPI T275 sp-02 (2002) Screening of pulp (Somerville-type equipment)
  • TAPPI T200 sp-01 (2001) Laboratory beating of pulp (Valley beater method)
  • TAPPI T 402 sp-03 [2003]Standard conditioning and testing atmospheres for paper, board, pulp handsheets, and related products
  • TAPPI T525 om–02 (2002) Diffuse Brightness of Pulp (d/0)
  • TAPPI T519 om–02 (2002) Diffuse Opacity of Paper (d/0 paper backing)
  • TAPPI 414 om–98 (1998) Internal tearing resistance of paper (Elmendorf-type method)
  • TAPPI 403 om–02 (2002) Bursting strength of paper
  • TAPPI T494 om–01 (2001) Tensile Properties of Paper and Paperboard (Using Constant Rateof Elongation Apparatus)
  • URL-3 (2015). http://balcikhisar-der.tr.gg/ANA-SAYFA.htm.
  • Ververis C, Georghiou K, Christodouulakis N, Santas P, Santas R (2004) Fiber dimensions, lignin and cellulose of various plant materials and their suitability for paper production. Industrial Crops and Products 19 (3): 245-254
  • Wise L E, Jahn C (1952) Wood Chemistry. 2nd Edition Vol 1-2 Reinhold Publication Co. New York U.S.A.
  • Yaman B, Gençer A, (2005) Trabzon koşullarında yetiştirilen kiwi (Actinidia deliciosa (A.Chev.) C. F. Liang& A. R. Ferguson)’ nin morfolojisi. Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi A (2): 149-155.
There are 27 citations in total.

Details

Journal Section Research Article
Authors

Ayhan Gençer 0000-0002-0758-5131

Hasan Aksoy

Publication Date October 15, 2017
Acceptance Date September 15, 2017
Published in Issue Year 2017Volume: 18 Issue: 2

Cite

APA Gençer, A., & Aksoy, H. (2017). Yabani kızılcık (Cornus australis L.) odunundan kâğıt üretimi ve kabuğun kâğıt özelliklerine etkisi. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, 18(2), 186-191. https://doi.org/10.17474/artvinofd.307335
AMA Gençer A, Aksoy H. Yabani kızılcık (Cornus australis L.) odunundan kâğıt üretimi ve kabuğun kâğıt özelliklerine etkisi. ACUJFF. October 2017;18(2):186-191. doi:10.17474/artvinofd.307335
Chicago Gençer, Ayhan, and Hasan Aksoy. “Yabani kızılcık (Cornus Australis L.) Odunundan kâğıt üretimi Ve kabuğun kâğıt özelliklerine Etkisi”. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 18, no. 2 (October 2017): 186-91. https://doi.org/10.17474/artvinofd.307335.
EndNote Gençer A, Aksoy H (October 1, 2017) Yabani kızılcık (Cornus australis L.) odunundan kâğıt üretimi ve kabuğun kâğıt özelliklerine etkisi. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 18 2 186–191.
IEEE A. Gençer and H. Aksoy, “Yabani kızılcık (Cornus australis L.) odunundan kâğıt üretimi ve kabuğun kâğıt özelliklerine etkisi”, ACUJFF, vol. 18, no. 2, pp. 186–191, 2017, doi: 10.17474/artvinofd.307335.
ISNAD Gençer, Ayhan - Aksoy, Hasan. “Yabani kızılcık (Cornus Australis L.) Odunundan kâğıt üretimi Ve kabuğun kâğıt özelliklerine Etkisi”. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 18/2 (October 2017), 186-191. https://doi.org/10.17474/artvinofd.307335.
JAMA Gençer A, Aksoy H. Yabani kızılcık (Cornus australis L.) odunundan kâğıt üretimi ve kabuğun kâğıt özelliklerine etkisi. ACUJFF. 2017;18:186–191.
MLA Gençer, Ayhan and Hasan Aksoy. “Yabani kızılcık (Cornus Australis L.) Odunundan kâğıt üretimi Ve kabuğun kâğıt özelliklerine Etkisi”. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, vol. 18, no. 2, 2017, pp. 186-91, doi:10.17474/artvinofd.307335.
Vancouver Gençer A, Aksoy H. Yabani kızılcık (Cornus australis L.) odunundan kâğıt üretimi ve kabuğun kâğıt özelliklerine etkisi. ACUJFF. 2017;18(2):186-91.
Creative Commons License
Artvin Coruh University Journal of Forestry Faculty is licensed under a Creative Commons Attribution 4.0 International License.