Teknik Not
BibTex RIS Kaynak Göster

The Usage Of Nutshell In The Production of Polypropylene Based on Polymer Composite Panels

Yıl 2013, Cilt: 14 Sayı: 1, 50 - 56, 20.04.2013

Öz

Natural fibers have been commonly utilized to reinforced materials for many years. Recently due to advantages of natural fibers such as low cost, high physical and mechanical resistance are produced plastic-composite materials by mixing various proportions. In addition, plastic composites are used natural fibers include agricultural wastes (wheat straw, rice straw, hemp fiber, shells of various dry fruits, etc.). In this study, polymer composites were manufactured using waste nutshell flour as filler and polypropylene (PP) as polymer matrix. The nutshell-PP composites were manufactured via extrusion and compression methods. The final product tested to determine their tensile, flexural, impact strength properties as well as some physical features such as thickness swelling and water absorptions. The best results were obtained composites containing 30% nutshell flour. In addition, composites which were produced nutshell provided the values of ASTM D6662 standard. The data collected in our country which waste a large portion of nutshell allows for the evaluation of the production polymer composites. The incorporation of nutshell flour feasible to produce plastic composites when appropriate formulations were used. As a result hazelnut shell which was considered agricultural waste can be utilized in polymer composite production.

Kaynakça

  • ASTM D 1037 (1996) Evaluating Properties of Wood-Base Fiber and Particle Panel
  • Materials, ASTM International, West Conshohocken, PA. ASTM D 6662 (2001) Standard Specification for Polyolefin-Based Plastic Lumber
  • Decking Boards, ASTM International, West Conshohocken, PA. ASTM D 256 (2002) Determining the Izod Pendulum Impact Resistance of Plastics, ASTM International, West Conshohocken, PA.
  • ASTM D 638 (2004) Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, PA.
  • ASTM D 790 (2004) Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, ASTM International, West Conshohocken, Philadelphia, PA.
  • Cooper PA, Balatinecz JJ (1999) Agricultural Waste Materials for Composites, Centre for Management Technology Global Panel Based Conference (October 18-19), Kuala Lumpur, ML.
  • EN 317 (1993) Particleboards and Fiberboards, Determination of Swelling in Thickness
  • After Immersion in Water, CEN, Brussels. Belgium. Hill MK (2010) Understanding Environmental Pollution, Third Edition Cambridge University Press, New York, 534 s.
  • Korucu T, Mengeloğlu F (2007) Potentials of Agricultural Residues as Raw Materials and Their Alternative Usage Possibilities in Turkey. 24th National Agricultural Mechanization Congress, Kahramanmaras, s. 297-307.
  • Kurt R, Karademir A, Çetin NS, Özmen N (2002) Potential Utilization of Wood Residue in Turkey. First International Ukranian Conference on Biomass, Kiev, Ukranian (CD)
  • Matuana LM, Heiden PA (2004) Wood Composites, Encyclopedia of Polymer Science and Technology, 12: 521-546.
  • Mengeloğlu F, Alma MH (2002) Buğday Saplarının Kompozit Levha Üretiminde Kullanılması, KSÜ Fen ve Mühendislik Dergisi, 5 (2): s. 37
  • Mengeloğlu F, Alma MH, Çetin NS (2002) Plastik Endüstrisinde Buğday Sapı Ununun Kullanılabilirliği. Gazi Üniversitesi Orman Fakültesi Dergisi, 2 (2): s. 57-65.
  • Mengeloğlu F (2006) Wood/Tfhermoplastic Composites. I. Polimerik Kompozitler Sempozyumu ve Sergisi. TBMOB Kimya Mühendisleri Odası, İzmir, s. 471-480.
  • Karakuş K (2008) Üniversitemizdeki polietilen ve polipropilen atıkların polimer kompozit üretiminde değerlendirilmesi, Kahramanmaraş Sütçü İmam Üniversitesi, Fen Bilimleri Entitüsü, Yüksek Lisans Tezi, Kahramanmaraş.
  • Rowell RM (1995) A New Generation of Composite Materials from Agro-Based Fiber. 3 rd International Conference on Frontiers of Polymers and Advanced Material (January 1620), Kuala Lumpur, ML. 659-665. Rowell RM (2001) Performance Driven Composites From Lignocellulosic Resources, International Conference on Science and Technology of Composites Materials, 29-32 s.
  • Simonsen J (1995) The Mechanical Properties Of Wood Fiber Plastic Composites: Theoretical vs. Experimental. in: Proceedings of Wood Fiber Plastic Composites, Forest Products Society, Proceedings No. 7293, 47-55.
  • Stokke DD, Gardner DJ (2003) Fundamental Aspects of Wood as a Component of Thermoplastic Composites, Journal of Vinyl and Additive Technology, 9, 2, 96–104.
  • Yıldırım A (2007) Öğütülmüş fındık kabuğunun polipropilen matrisli kompozitlerde kullanılabilirliği, Marmara Üniversitesi, Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, İstanbul.

Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi

Yıl 2013, Cilt: 14 Sayı: 1, 50 - 56, 20.04.2013

Öz

Doğal lifler uzun yıllardan bu yana güçlendirici malzeme olarak kullanılmaktadır. Doğal lifler düşük maliyette olması, yüksek fiziksel ve mekanik dirence sahip olması gibi birçok avantajından dolayı plastiklerle çeşitli oranlarda karıştırılarak plastik-kompozit malzemeler üretilmektedir. Plastik kompozitlerde kullanılan doğal lifler arasında tarımsal atıklar (buğday sapı, pirinç sapı, kenevir lifi, çeşitli kuru meyve kabukları vb.) da yer almaktadır. Bu çalışmada polipropilen (PP) ve atık fındık kabuklarından elde edilen unlar farklı oranlar kullanılarak polimer kompozit üretilmiştir. Ekstrüzyon ve pres kalıplama yöntemleriyle üretilen kompozitlerin; çekme, eğilme, darbe direnci, kalınlığına şişme ve su alma değerleri incelenmiştir. En iyi sonucun %30 oranında fındık kabuğu unu kullanılan kompozitlerde elde edildiği belirlenmiştir. Bununla birlikte üretilen kompozitlerin eğilme direnci ve elastikiyet modülü değerlerine bakıldığında ASTM D6662 standardındaki değerleri sağladığı görülmüştür. Elde edilen veriler ile ülkemizde büyük bir kısmı atıl halde olan fındık kabukları, polimer kompozit üretiminde değerlendirilebilmesine olanak sağlamaktadır. Bu sayede fındık kabuğunun farklı alanlarda kullanılarak üreticilere yeni bir gelir kaynağı oluşturulması hedeflenmiştir.

Kaynakça

  • ASTM D 1037 (1996) Evaluating Properties of Wood-Base Fiber and Particle Panel
  • Materials, ASTM International, West Conshohocken, PA. ASTM D 6662 (2001) Standard Specification for Polyolefin-Based Plastic Lumber
  • Decking Boards, ASTM International, West Conshohocken, PA. ASTM D 256 (2002) Determining the Izod Pendulum Impact Resistance of Plastics, ASTM International, West Conshohocken, PA.
  • ASTM D 638 (2004) Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, PA.
  • ASTM D 790 (2004) Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, ASTM International, West Conshohocken, Philadelphia, PA.
  • Cooper PA, Balatinecz JJ (1999) Agricultural Waste Materials for Composites, Centre for Management Technology Global Panel Based Conference (October 18-19), Kuala Lumpur, ML.
  • EN 317 (1993) Particleboards and Fiberboards, Determination of Swelling in Thickness
  • After Immersion in Water, CEN, Brussels. Belgium. Hill MK (2010) Understanding Environmental Pollution, Third Edition Cambridge University Press, New York, 534 s.
  • Korucu T, Mengeloğlu F (2007) Potentials of Agricultural Residues as Raw Materials and Their Alternative Usage Possibilities in Turkey. 24th National Agricultural Mechanization Congress, Kahramanmaras, s. 297-307.
  • Kurt R, Karademir A, Çetin NS, Özmen N (2002) Potential Utilization of Wood Residue in Turkey. First International Ukranian Conference on Biomass, Kiev, Ukranian (CD)
  • Matuana LM, Heiden PA (2004) Wood Composites, Encyclopedia of Polymer Science and Technology, 12: 521-546.
  • Mengeloğlu F, Alma MH (2002) Buğday Saplarının Kompozit Levha Üretiminde Kullanılması, KSÜ Fen ve Mühendislik Dergisi, 5 (2): s. 37
  • Mengeloğlu F, Alma MH, Çetin NS (2002) Plastik Endüstrisinde Buğday Sapı Ununun Kullanılabilirliği. Gazi Üniversitesi Orman Fakültesi Dergisi, 2 (2): s. 57-65.
  • Mengeloğlu F (2006) Wood/Tfhermoplastic Composites. I. Polimerik Kompozitler Sempozyumu ve Sergisi. TBMOB Kimya Mühendisleri Odası, İzmir, s. 471-480.
  • Karakuş K (2008) Üniversitemizdeki polietilen ve polipropilen atıkların polimer kompozit üretiminde değerlendirilmesi, Kahramanmaraş Sütçü İmam Üniversitesi, Fen Bilimleri Entitüsü, Yüksek Lisans Tezi, Kahramanmaraş.
  • Rowell RM (1995) A New Generation of Composite Materials from Agro-Based Fiber. 3 rd International Conference on Frontiers of Polymers and Advanced Material (January 1620), Kuala Lumpur, ML. 659-665. Rowell RM (2001) Performance Driven Composites From Lignocellulosic Resources, International Conference on Science and Technology of Composites Materials, 29-32 s.
  • Simonsen J (1995) The Mechanical Properties Of Wood Fiber Plastic Composites: Theoretical vs. Experimental. in: Proceedings of Wood Fiber Plastic Composites, Forest Products Society, Proceedings No. 7293, 47-55.
  • Stokke DD, Gardner DJ (2003) Fundamental Aspects of Wood as a Component of Thermoplastic Composites, Journal of Vinyl and Additive Technology, 9, 2, 96–104.
  • Yıldırım A (2007) Öğütülmüş fındık kabuğunun polipropilen matrisli kompozitlerde kullanılabilirliği, Marmara Üniversitesi, Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, İstanbul.
Toplam 19 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Mimarlık
Bölüm Araştırma Makalesi
Yazarlar

Selçuk Akbaş

Mürşit Tufan

Türker Güleç

Cihat Taşçıoğlu

Hüseyin Peker

Yayımlanma Tarihi 20 Nisan 2013
Yayımlandığı Sayı Yıl 2013Cilt: 14 Sayı: 1

Kaynak Göster

APA Akbaş, S., Tufan, M., Güleç, T., Taşçıoğlu, C., vd. (2013). Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, 14(1), 50-56.
AMA Akbaş S, Tufan M, Güleç T, Taşçıoğlu C, Peker H. Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi. AÇÜOFD. Nisan 2013;14(1):50-56.
Chicago Akbaş, Selçuk, Mürşit Tufan, Türker Güleç, Cihat Taşçıoğlu, ve Hüseyin Peker. “Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi”. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 14, sy. 1 (Nisan 2013): 50-56.
EndNote Akbaş S, Tufan M, Güleç T, Taşçıoğlu C, Peker H (01 Nisan 2013) Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 14 1 50–56.
IEEE S. Akbaş, M. Tufan, T. Güleç, C. Taşçıoğlu, ve H. Peker, “Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi”, AÇÜOFD, c. 14, sy. 1, ss. 50–56, 2013.
ISNAD Akbaş, Selçuk vd. “Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi”. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 14/1 (Nisan 2013), 50-56.
JAMA Akbaş S, Tufan M, Güleç T, Taşçıoğlu C, Peker H. Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi. AÇÜOFD. 2013;14:50–56.
MLA Akbaş, Selçuk vd. “Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi”. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, c. 14, sy. 1, 2013, ss. 50-56.
Vancouver Akbaş S, Tufan M, Güleç T, Taşçıoğlu C, Peker H. Fındık Kabuklarının Polipropilen Esaslı Polimer Kompozit Üretiminde Değerlendirilmesi. AÇÜOFD. 2013;14(1):50-6.
Creative Commons Lisansı
Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi Creative Commons Alıntı 4.0 Uluslararası Lisansı ile lisanslanmıştır.